How to scan a barcode to log packaged food
Packaged food is the easiest food to count, because the numbers are already printed on the pack. Scanning the barcode pulls those numbers into your log in a few seconds, with no guessing. This guide covers how to scan, how to log the amount you actually ate, and what to do when a product is missing or the numbers look wrong.
Short answer
Open the barcode scanner in your food log, point the camera at the barcode, and the product comes up with the numbers from its label. Set how much you ate, check the numbers against the pack the first time, and save.
- A scan reads the label, so it is exact. A photo or a description is an estimate.
- Log what you ate, not the whole pack. Half a bag is half the calories.
- If the product is missing, take a photo of the nutrition label or type the numbers.
Updated November 2026
Why scan instead of estimate
A meal from a photo or a description is an estimate. A packaged food does not need one. The calories, protein, carbs and fat are on the label, so a scan gives you the real numbers in less time than typing the name.
That makes barcodes the best place to start if you are new to counting. Snacks, yogurt, protein bars, cereal and drinks are often a big part of the day, and they are exactly the foods with a barcode.
The steps
- Open the scanner. In SayLift, tap Scan on the Food tab or in the meal screen. Allow camera access the first time.
- Point the camera at the barcode. Hold the pack flat and steady, with the barcode inside the frame. It reads on its own; you do not press a button.
- Check the product. The product comes up with its name and the numbers from the label, sized to how the pack is usually eaten.
- Set how much you ate. Use Less and More to change the amount. Half a bar, two servings, the whole bottle.
- Compare with the pack the first time. Product data comes from Open Food Facts, a public database that people add to. If a number is off, change it.
- Save. The food goes on your day, with the rest of your meals.
Log the amount you really ate
The most common mistake with barcodes is not the scan. It is the amount. A bag of crisps may hold three servings, and a bottle of juice may hold two. If you log one serving and eat the whole thing, the log is off by two or three times.
So look at what you actually ate and set the amount to match. If the label says 30 g per serving and you ate about half of a 150 g bag, that is 75 g, or two and a half servings.
When something goes wrong
| Problem | What to do |
|---|---|
| The product is not found | Take a photo of the nutrition label, or enter the numbers by hand |
| The numbers do not match the pack | Change the numbers on the line to match the label, then save |
| The camera will not read the barcode | Use better light, hold the pack flat, and move a little closer or farther |
| Your device cannot scan | Type the number printed under the barcode instead |
| The same product has a new recipe | Check the label again and fix the numbers once |
Food with no barcode
Fresh food, home cooking and restaurant meals have no barcode. For those, describe the meal in a few words or take a photo, then check the lines. A meal can mix both: scan the yogurt, then say "with a handful of blueberries and a spoon of honey".
How SayLift does it
SayLift lets you log a meal four ways: say it, snap it, scan it or type it. A scan is a plain lookup of the label numbers, with no estimate. Your day shows a calorie ring, your protein, carbs and fat, and every meal, on the same timeline as your workouts.
The honest limits. Scanned numbers are only as good as the product data. Check them against the pack the first time. Not every product is in the database, especially local brands. Photo and voice estimates need a connection and are capped at 10 an hour and 20 a day. It runs on iPhone and Android, and it is subscription only at $4.17 a month billed $49.99 a year ($7.99 a month or $3.99 a week) after a 3-day trial, and the one subscription also covers the workout tracker.
Frequently asked questions
Is scanning a barcode more accurate than a photo?
Yes. A barcode brings in the numbers from the label. A photo is an estimate and often misses oil and sauces.
What if the barcode is not found?
Take a photo of the nutrition label, or type the numbers in by hand. In SayLift, both options show up when a product is unknown.
Where do the scanned numbers come from?
In SayLift, from Open Food Facts, a free public product database that people add to. Most numbers are right, but check them against the pack the first time.
How do I log half a pack?
Scan it, then use Less to set the amount to what you ate. Calories, protein, carbs and fat update with the amount.
Can I scan without a camera?
If your device cannot scan, type the number printed under the barcode. The lookup works the same way.
Does scanning need the internet?
Yes. The product numbers are looked up online. Typing a food with your own numbers works offline.
Scan the pack. Log what you ate.
Point the camera at the barcode and SayLift fills in calories, protein, carbs and fat from the label. Your meals sit next to your workouts. iPhone and Android, 3 days free then $4.17 a month, billed $49.99 a year.
Reading this on a laptop? Scan to install.